Last Modified: 11-29-2007 1.6 A
Service Category: Engine/Hybrid System Section: Cruise Control
Model Year: 2008 Model: Sequoia Doc ID: RM000002VLZ002X
Title: CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: REMOVAL (2008 Sequoia)

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 Sequoia) .

2. REMOVE LOWER NO. 2 STEERING WHEEL COVER SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: REMOVAL (2008 Sequoia)+

3. REMOVE LOWER NO. 3 STEERING WHEEL COVER SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: REMOVAL (2008 Sequoia)+

4. REMOVE STEERING PAD SUPPLEMENTAL RESTRAINT SYSTEMS: STEERING PAD: REMOVAL (2008 Sequoia)+

5. REMOVE CRUISE CONTROL MAIN SWITCH

(a) Disconnect the connector.

(b) Remove the 2 screws.

(c) Remove the switch, as shown in the illustration.